Uxcell Peças 400×600 mm Deadener Som do Carro Almofada da Esteira da Isolação Térmica Amortecimento Auto Adesivo Deadening Porta Piso Barreira de Som
R$ 173,35
DÚVIDAS?
Envie um email para:
Algodão de Isolamento Térmico e Acústico
Vídeo de Demonstração do Produto
Opção de Compra e tempo de entrega
Ficha técnica do produto
Características | Especificações |
---|---|
Material | Borracha Butílica e Materiais de Polímero Sintético |
Tipo | Bloco de Isolamento |
Colocação | Hood, porta do Carro, tampa da Cauda, tronco, chassis, fender, parede Interior, telhado |
Nome da Marca | Uxcell |
Origem | CN (origem) |
CN | Guangdong |
-
Made of butyl material for heat resistance.This material eliminates vibrations, reduces general noise and rattle of the vehicle allowing for higher comfort.
-
Self-adhesive sound dampening material,it is easy to install.
-
It is desined in handy size which make it easier in terms of cutting.
-
Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption.
-
Color: Silver Tone
-
Material: Butyl Rubber, Aluminum
-
Total Coverage Area: 5 sqft
-
Thickness: 2mm / 0.08 inch / 80 mil
-
Size: 600x400mm / 23.62”x15.75”(L*W)
-
Decide what part you want to insulate first: car roof,car floor,car doors or a hood.
-
Remove the remains of the factory insulation once you have dismantled the interior.Properly clean and degrease the surface prior to installation of mat.
-
Measure the pre-cleaned surface of the prospective spot that you are going to treat.
-
Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.When your sheet is ready to used,lay that down to the surface and let is glue.Flatten the sheet with hands to avoid air bubbles.Use a roller for rolling down the foil as a neat step.
-
Please clean the surface you want to paste.
-
You could heat with a hair dryer to make it soft,then compacted by hand.If the room temperature is below 5 degrees Celsius first with lamp heating it until soft.
-
It would be best to wear the gloves when working.
-
2 x Heat Sound Deadener Insulation Mat
-
1 x Manual
1. Amortecimento Auto Adesivo Deadening Porta Piso Barreira de Som – Interface de Energia : 4pin
2. Uxcell 2 Pces 400x600mm Deadener Som do – a Velocidade do Ventilador : 800 – 1800rpm
3. Cheap Algodão de Isolamento Térmico e Acústico – Tdp : 1.2w
4. Algodão de Isolamento Térmico e Acústico – Cpu Suportado : Lga 755lga 775lga771lga 1150lga1151lga1155lga 1156lga1200lga1356lga1366tomada Fm2 +tomada Am3 +am4
5. Carro Almofada da Esteira da Isolação Térmica – Heatpipes : 4
6. High Quality Automóveis e Motos – tipo de Refrigerador : Tower
7. Automóveis e Motos – Número do Modelo : S120d
8. Amortecimento Auto Adesivo Deadening Porta Piso Barreira de Som – Série : s
9. Uxcell 2 Pces 400x600mm Deadener Som do – For Amd Socketkeep Your Original Mount : Am2am2+am3am3+am4
Avaliações de Usuários
Seja o primeiro a avaliar “Uxcell Peças 400×600 mm Deadener Som do Carro Almofada da Esteira da Isolação Térmica Amortecimento Auto Adesivo Deadening Porta Piso Barreira de Som”
R$ 173,35
Não existe nenhuma avaliação ainda.